Torsion and extension springs, replaced safely — across Naples, East Naples, North Naples, Golden Gate, Marco Island, Bonita Springs, Fort Myers.
When a garage door spring breaks, the door loses the part that actually lifts it. The springs offset the full weight of the door, and without them the opener is asked to do work it was never built for. Torsion springs sit on a shaft above the opening and turn as the door travels; extension springs run alongside the horizontal tracks and stretch. Both hold high tension, which is why DASMA says spring replacement belongs to a trained door systems technician and not to the homeowner.
The replacement has to match the door, not a chart. Door weight, wire size, length, inside diameter and the number of turns all matter. DASMA warns that too few turns leave a door drifting down from its open position and too many overload the shaft and other parts, and that paint or added components can push a door past the weight its springs were made for. We weigh and measure first, replace the springs, inspect the cables and drums that took the shock when the spring let go, and set the balance so the door holds at halfway.
Salt and moisture shorten a spring's life by working on the steel before the cycles do. DASMA's sheet on spring cycle life explains that rust shrinks the wire's effective area and that corrosion pits are where fatigue cracks start and speed up, and its advice for saline coastal locations is to keep the door shut whenever it can be. With two thirds of Naples' yearly rain arriving between June and September, springs here seldom stay dry. We fit coated springs, check turn counts against the door, and wipe and lubricate the coils at each visit.
Photos from the kind of jobs our technicians handle every week across Naples, North Naples and Marco Island.
Spring work starts here; the on-site quote covers the whole door.
These are where Collier County jobs begin, not the final bill. Door size and weight, the grade of parts and how many pieces get changed set the figure, and you approve it at the door before work begins.
Door weight, wire size, length, inside diameter and spring type are recorded, because a chart is never the final word.
The replacement springs, their cycle rating and the price are agreed on site before the old ones are touched.
The door is clamped, the new springs wound to the maker's turn count, and cables and drums are checked for shock damage.
The door must hold at half open and travel smoothly on the opener, then the reverse and photo-eyes are tested.
3 locations across Collier County — call the one nearest you, every line is answered 24/7, or send the form and we call you right back.
Serving Old Naples, Port Royal, Park Shore, East Naples, Lely and Golden Gate.
Serving Pelican Bay, Pelican Marsh, Vanderbilt Beach, Pine Ridge, Bonita Springs, Estero and Fort Myers.
Serving Marco Island, Goodland, Isles of Capri and Hideaway Beach.
Say what the door is doing, add a photo if you have one, and a SiSi dispatcher phones you back. Every service page lists its starting price, the pricing page has the whole list, and the final number is agreed on site first.
Prefer to talk? Naples: (239) 426-6564
